There are several things you can do with your laser level. They can be hanging pictures, installing wall tiles, installing ceiling, and many more. Whatever you will do with this tool, it is important to understand how to set up the laser level. Then, it can be followed with some other applications. To set tool, you need to make sure that this tool is in a flat surface. Then, you need to have another surface to catch the beam, such as wall. But if you work in outdoor area, you can use laser detector.
To hang picture on the wall, what you need to do with your ideas on best laser level is to firstly determine the height of the picture. Then, put a mark on the wall and turn on the tool and align it horizontally to find another point in one level. Then, punch a nail at the mark and simply place the picture. Repeat these steps to hang more pictures. To install wall tiles, laser level can be also used. The most important part is getting the first row of the tiles. First, you need to identify a point on the wall. Turn the tool on and align horizontal line to the first point. Then, create a line by using 2” wide board on the wall. Rest the tiles on the top of the board and create the first row of tiles. Then, continue putting the tiles to complete the walling.
Laser level can be also used to install ceiling fixture. First, you need to create a mark on the floor representing the position of fixtures. Set the laser on a tripod and turn it on. Using downward pointing beam, line up the center of the fixture. Then, follow it by marking the location by using the upward pointing beam. Make some measurements on the floor. After that, mark those measurements on the ceiling. Finally, hold up the fixture and install.